This is the second in a series of tutorials walking you through the process for submitting your bird observations for Wisconsin Breeding Bird Atlas II. The first highlighted Incidental Observations and can be found here.
In this second article, we will walk you through submitting a complete checklist of all the birds you encountered during a birding trip to a state natural area. Submitting complete checklists of all birds observed is highly recommended and thus the standard for most atlas data entry. For this example, we will say you spent 3 hours canoeing and walking through Bark Bay Slough SNA in the Bark Bay NW block in Bayfield County.
Here we provide two versions of this explanation, the short version and the long version.
Note: These steps only specifically apply to submitting a complete checklist for a single location within a block. Because we recommend more precise data collection (see our guidance on Locational Precision), submitting checklists from multiple sub-block locations each day will be common and highlighted here in another feature at a later date. For a detailed overview of the steps summarized above, continue reading the long version below.
1. Make sure you are on the Atlas eBird website (which, if you are reading this online, you are).
Other eBird portals are not suitable for submitting atlas data. If you had at least one breeding code during a visit, submit the entire checklist to the atlas portal. If you had no breeding codes during a visit, use the traditional Wisconsin eBird site www.ebird.org/wi. See here for details on portal use.
2. Make sure you are signed in. Click “Sign in or register as a new user” towards the top left of the screen and enter your username and password. Create an account if needed; it’s simple and does not take long. If you already have an existing eBird account (or one for another Cornell project) you can use that account for the Atlas eBird portal.
3. Click the “Submit Observations” button at the top.
On the next screen, you’ll want to use “Find it on a Map.” Start typing your county name slowly and a list of locations will appear. Click on the county name. (This also works at block level, if you know your block name).
4. The map will appear, zoomed into your county. Use the zoom tools on the left hand side of the map to zoom in further (+) or back out (-). The magnifying glass option beneath the zoom scale bar allows you to click and drag a box around your location if you want to zoom in faster. You can click and hold to drag around the map. You may see big red location markers and little blue location markers. Red markers are existing hotspots such as a state park, a national wildlife refuge, or a city park, where people bird often. If you see blue markers, those are for personal eBird locations you have previously entered.
You could select one of the red or blue points as your location by clicking them, but only if it accurately represents where you birded. If you are choosing an existing location, be aware of block lines. Many hotspots are very near block intersections, and it is imperative that sightings go into the correct block. In many cases, you’ll be entering a point that is representative of the route within your block that you covered, in which case you’ll want to plot the point roughly in the middle of area you birded.
5. Today, we can see that there is already a hotspot for Bark Bay Slough SNA, it is in the correct block, and it is representative of the area we covered that morning, so we will click the red marker to select the hotspot as our location. Beware, however, that more often than not the hotspot will NOT be representative and you will need to create and subsequently use a new — albeit nearby — personal location. Then hit “Continue.”
6. On the Date and Effort page, enter the date of the observation. Then select your observation type. There are 4 types used while atlasing:
1) Traveling – Property Specific, when you traveled within your block AND within a single property (e.g. a State Natural Area)
2) Traveling – General, when you traveled within your block but crossed property boundaries
3) Stationary, when you did not move more than 100 feet during your observation
4) Incidental, when you were not specifically out birding, but you noticed birds you want to report
Today, we’ll use Traveling – Property Specific, because we traveled within a single property (Bark Bay Slough SNA). Although such property-specific data are highly recommended, the concept of a complete checklist of all birds observed can be applied to any traveling or stationary count. On the other hand, eBird considers all checklists with incidental observation types as NOT complete by default.
Enter your start time, the amount of time you birded (3 hours in this example), and the number of people in your party who are actively locating and/or identifying birds.
To determine the distance you traveled, you can use the Distance and Coordinates tab on the interactive map. Click “Distance”, set the Measurement Info to “Miles”, and click the map repeatedly to draw an approximation of your route that day. The distance of individual line segments will show up on the map, and your total route will show up at the top of the screen next to Total. Websites like www.runningmap.com provide similar functionality, but may not have the property and block boundaries useful for atlasing.
Enter the distance you traveled while birding. In this example we’ll estimate 1.25 miles. Traveling counts greater than 5 miles are highly discouraged. In fact, for best atlas results most counts should be less than 3 miles in length. Remember that distances are one-way, i.e. walking a trail 1.5 miles in length and then returning back along the same trail yields a traveling count of 1.5 miles, not 3. Also be sure that your checklist does not span block or county lines. Record new, separate checklists to ensure the bird data reported apply to the block and county in which plotted.
Select “Continue” and proceed to the next page.
7. This is the checklist page. The bird checklist you see is customized for your area and date. Enter the entire list of all species you observed during this visit. You can scroll down to a species on the list (or use the Jump to Species box on the right to find it; for Red-winged Blackbird start typing Red-wi and it will show up, or use the 4-letter code RWBL). There are some additional buttons on the right that can adjust how the checklist is displayed. “Add Species” adds a species that is not on the checklist; “Alphabetic” sorts the species alphabetically; “Show Rarities” adds rare species to the checklist; “Show Subspecies” adds subspecies to the checklist; and “Group by Most Likely” sorts by which species are most likely for that area and date. Hint: If you observed a species not listed, clicking the “Show Rarities” box solves the issue most of the time.
Once you’ve found the species name, enter the number of individuals that you saw or heard for each species. Then click “Add Breeding Code or Details” and select a breeding code, if applicable. Enter the highest breeding code you observed for that species for that day in the block (they are listed in descending order). For bird species for which you did not observe a breeding code of Possible or higher, just enter the number of individuals you saw or heard. Do NOT enter birds with breeding codes on one checklist and then birds without breeding codes on another. This is not necessary and only makes more work for you. Only during peak nesting season (June–July) are most checklists likely to have all species with breeding codes.
Note these codes are only to be used during the breeding season. You may hear a Dark-eyed Junco singing in February, but because that bird may still be wintering or migrating, you wouldn’t want to code it as “S — Singing male” until you had reason to believe it was on territory. It can be difficult to keep track of when every species breeds, but we have produced a helpful document to guide you called the Breeding Guideline Bar Chart. Keep in mind the bar chart is only meant as general guidance on when to expect species to be breeding. If you see a male-female pair of Scarlet Tanagers hopping around with each other a week before the chart says they should be, feel free to code them as “P — Pair” and include notes on what you saw. Your behavioral observations should trump the chart – the chart is just some general guidance to let you know when species are likely to still be migrating and when lower-level codes should be used with caution. Depending on your location in the state and the kind of spring we are having, dates on that chart could be off by several weeks.
Once you have entered your complete list of birds, entered numbers of each species you saw or heard, entered breeding codes for species where you observed a breeding behavior, and entered any comments you wish in the Details field (you can also use this field to embed photos), there is one last thing to do. You must answer the question in the lower right, “Are you submitting a complete checklist of all the birds you could identify?” In this case, we are, so we will click “Yes.” Complete checklists are more useful for analysis and are highly recommended.
Then hit Submit!
8. When your checklist is submitted, you will see the following screen:
You can review this to make sure the date, location, and other details are correct. If you need to edit any information, click the various Edit buttons. If someone was birding with you and you want to share this checklist with their eBird account, use the “Share w/ Others in Your Party” button. If you want to show this checklist to some friends who were not present, you can copy the URL in the top menu bar (e.g. ebird.org/ebird/atlaswi….) and paste it into an email or on Facebook. If you want to submit another checklist for this general location, you can use the options on the right. A link on the top right allows you to access all of your checklists – when viewing this on the atlas portal, this link will only include atlas checklists. If you view this through www.ebird.org/wi it will include atlas and regular eBird checklists. All submissions to the Atlas eBird portal will find their way into your main eBird account, and will show on maps, lists, and the My eBird tab.
Any questions? Email us at firstname.lastname@example.org.